From: michael.borthwick@3:712/132.remove-vn8-this

So I have these settings in my template sub-board

Access Requirements LEVEL 10
Reading Requirements LEVEL 10
Posting Requirements LEVEL 50
Operator Requirements LEVEL = 99
Moderated Posting User LEVEL = 90

When I select Clone Options it doesn[t clone the access requirement?

So I end up with;

Access Requirements EMPTY
Reading Requirements LEVEL 10
Posting Requirements LEVEL 50
Operator Requirements LEVEL = 99
Moderated Posting User LEVEL = 90

Am I doing it wrong?

--- Mystic BBS v1.12 A39 2018/04/21 (Raspberry Pi/32)
* Origin: Fusion BBS ~ Newcastle, Australia (3:712/132)
--- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: digital.man@vert.synchro.net.remove-s76-this

To: Michael Borthwick
Re: Message board cloning issue
By: Michael Borthwick to All on Sat Feb 02 2019 04:18 pm

So I have these settings in my template sub-board

Access Requirements LEVEL 10
Reading Requirements LEVEL 10
Posting Requirements LEVEL 50
Operator Requirements LEVEL = 99
Moderated Posting User LEVEL = 90

When I select Clone Options it doesn[t clone the access requirement?

So I end up with;

Access Requirements EMPTY
Reading Requirements LEVEL 10
Posting Requirements LEVEL 50
Operator Requirements LEVEL = 99
Moderated Posting User LEVEL = 90

Am I doing it wrong?

No you're doing it right. The reason: if you wanted all the sub-boards of a group to have the *same* access requirements, the correct way to accomplish that is to set the access requirements for the *group* instead.

digital man

Synchronet/BBS Terminology Definition #68:
UART = Universal Asynchronous Receiver/Transmitter
Norco, CA WX: 55.6øF, 79.0% humidity, 0 mph SW wind, 0.00 inches rain/24hrs
--- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: michael.borthwick@3:712/132.remove-tcl-this

To: Digital Man

No you're doing it right. The reason: if you wanted all the sub-boards
of a group to have the *same* access requirements, the correct way to accomplish that is to set the access requirements for the *group*
instead.

Will a sub board access control override the group access control? If I set
the fidonet group access to 10 and say the z1 sysop to 60 which will it use?

--- Mystic BBS v1.12 A39 2018/04/21 (Raspberry Pi/32)
* Origin: Fusion BBS ~ Newcastle, Australia (3:712/132)
--- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: michael.borthwick@3:712/132.remove-tcl-this

To: Digital Man

No you're doing it right. The reason: if you wanted all the sub-boards
of a group to have the *same* access requirements, the correct way to accomplish that is to set the access requirements for the *group*
instead.

Ah thanks for that :)

--- Mystic BBS v1.12 A39 2018/04/21 (Raspberry Pi/32)
* Origin: Fusion BBS ~ Newcastle, Australia (3:712/132)
--- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: digital.man@vert.synchro.net.remove-tcl-this

To: Michael Borthwick
Re: Re: Message board cloning issue
By: Michael Borthwick to Digital Man on Sat Feb 02 2019 05:04 pm

No you're doing it right. The reason: if you wanted all the sub-boards of a group to have the *same* access requirements, the correct way to accomplish that is to set the access requirements for the *group* instead.

Will a sub board access control override the group access control? If I set the fidonet group access to 10 and say the z1 sysop to 60 which will it use?

Both. Users with level 10 will have access to (see) the message group and only users with level 60 (or higher) will see teh "z1 sysop" sub-board. If the user has access to none of the sub-boards within a group, they won't have access to the group at all (they won't see it).

digital man

This Is Spinal Tap quote #10:
Dozens of people spontaneously combust each year... just not widely reported. Norco, CA WX: 55.0øF, 82.0% humidity, 0 mph SW wind, 0.00 inches rain/24hrs
--- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: michael.borthwick@3:712/132.remove-p0i-this

To: Digital Man
Thanks! :)

--- Mystic BBS v1.12 A39 2018/04/21 (Raspberry Pi/32)
* Origin: Fusion BBS ~ Newcastle, Australia (3:712/132)
--- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: digital.man@vert.synchro.net.remove-67y-this

To: Tony Langdon
Re: Re: Message board cloning issue
By: Tony Langdon to Michael Borthwick on Sat Feb 02 2019 08:11 pm

On 02-02-19 16:18, Michael Borthwick wrote to All <=-

So I have these settings in my template sub-board

Access Requirements LEVEL 10
Reading Requirements LEVEL 10
Posting Requirements LEVEL 50
Operator Requirements LEVEL = 99
Moderated Posting User LEVEL = 90

Is the template sub the first sum in the group? The clone feature clones the settings for the first sub in the group to the rest (I've used that a lot too).
The template sub holds the settings for any additional subs created after the template was setup.

The template sub (as of v3.17) doesn't have to be the first sub in the group. Any sub-board can be used as the template for cloning, but the "Access Requirements" value is not included in the settings that are cloned.

digital man

Synchronet "Real Fact" #71:
The largest dial-up Synchronet BBS was The Easy Street BBS with 25 nodes/lines. Norco, CA WX: 52.5øF, 93.0% humidity, 0 mph SSW wind, 0.05 inches rain/24hrs --- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: tony.langdon@3:633/410.remove-iw4-this

To: Michael Borthwick

On 02-02-19 16:18, Michael Borthwick wrote to All <=-

So I have these settings in my template sub-board

Access Requirements LEVEL 10
Reading Requirements LEVEL 10
Posting Requirements LEVEL 50
Operator Requirements LEVEL = 99
Moderated Posting User LEVEL = 90

Is the template sub the first sum in the group? The clone feature clones the settings for the first sub in the group to the rest (I've used that a lot too).
The template sub holds the settings for any additional subs created after the template was setup.


... It's innocence when it charms us, ignorance when it doesn't.
=== MultiMail/Win v0.51
--- SBBSecho 3.03-Linux
* Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (3:633/410)
--- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: tony.langdon@3:633/410.remove-6s6-this

To: Digital Man

On 02-02-19 04:30, Digital Man wrote to Tony Langdon <=-

The template sub (as of v3.17) doesn't have to be the first sub in the group. Any sub-board can be used as the template for cloning, but the "Access Requirements" value is not included in the settings that are cloned.

That much have been changed closer to the actual 3.17 release than I've configured. I'm yet to update to the stable release. Probably several weeks away, because I have to wait until weather conditions ease a bit.


... The cost of feathers has risen...now even DOWN is up!
=== MultiMail/Win v0.51
--- SBBSecho 3.03-Linux
* Origin: Freeway BBS Bendigo,Australia freeway.apana.org.au (3:633/410)
--- Synchronet 3.17c-Win32 NewsLink 1.110
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)