Hi All
I have downloaded oracle virtualbox 6.02 I am after same help please
But I cannot quite work out how to link my guest Ip up to the my router
to telnet in ie now how on my normal computer the sbbs/mystic I have
but this is different
at the monent I have network on bridger adaptor and I can go into my
other network computer probably not what I am after though
so which option
not attached
nat
nat network
internal network
host only network
generil driver
not attached
nat
nat network
internal network
host only network
generil driver
I use bridged.
Then I set the IP address within the operating system
(Windows, Linux, OS/2, etc.)
Once that is set, open a command prompt
and type "ping xxx.xxx.xxx.xxx", (ping router.ip.address) or web
browser (http://xxx.xxx.xxx.xxx), to see if you can reach the router.
You can also set up Virtual Box under Settings > Display > Remote
Display and use Remote Desktop Connection (vm.ip.address:port#) and control the computer as if you were at the keyboard and screen.
Hi All^^^^^^^^^^^^^
I have downloaded oracle virtualbox 6.02 I am after same help please
I have setup win 10 32 bit (guest I think) install a virus scanner
Hi Ray Quinn
not attached
nat
nat network
internal network
host only network
generil driver
I use bridged.
Ok I have it on bridged.
Then I set the IP address within the operating system
(Windows, Linux, OS/2, etc.)
May I ask were in window do I do this, just cannot remember ??
Once that is set, open a command prompt
and type "ping xxx.xxx.xxx.xxx", (ping router.ip.address) or web
yes I got this and this, reply 4 time to 192.168.1.1 bytes=32 time ttl=64
I am sure that is working okay I think
and from my other computer reply 4 time from to 192.168.1.47 bytes=32 time ttl=128
working I Think
browser (http://xxx.xxx.xxx.xxx), to see if you can reach the router.
in google chrome yes I went into the router setting alll good so far
You can also set up Virtual Box under Settings > Display > Remote
Display and use Remote Desktop Connection (vm.ip.address:port#) and control the computer as if you were at the keyboard and screen.
I take a note and work on this later, thank you
with all this I have setup my bbs with router port forwarding niop client wi bbs ip address (name)
and I should be ably to telnet in but won't mtel say (unable to resolve hostname) must hace missed samething.
any thought , might be my virus scanner or window firewall will keep working on it
You can also set up Virtual Box under Settings > Display > Remote
Display and use Remote Desktop Connection (vm.ip.address:port#) and control the computer as if you were at the keyboard and screen.
May I ask were in window do I do this, just cannot remember ??
yes I got this and this, reply 4 time to 192.168.1.1 bytes=32 time
ttl=64
I am sure that is working okay I think
and from my other computer reply 4 time from to 192.168.1.47 bytes=32 time ttl=128
working I Think
browser (http://xxx.xxx.xxx.xxx), to see if you can reach the
router.
in google chrome yes I went into the router setting alll good so far
You can also set up Virtual Box under Settings > Display > Remote
Display and use Remote Desktop Connection (vm.ip.address:port#)
and control the computer as if you were at the keyboard and
screen.
I take a note and work on this later, thank you
with all this I have setup my bbs with router port forwarding niop
client with bbs ip address (name) and I should be ably to telnet in
but won't mtel say (unable to resolve hostname) must hace missed samething. any thought , might be my virus scanner or window firewall will keep working on it
Thank you for your help
Ian S 1st choice Core sbbs nz
Hi Mortifis
I have downloaded oracle virtualbox 6.02 I am after same help please
I have setup win 10 32 bit (guest I think) install a virus scanner
^^^^^^^^^^^^^
Just curious here you are using VB v6.02 and installing win 10 32-bit? I was under the impression 32 bit support is no longer supporting 32 bit hosts, or are you setting it up as a 32-bit guest?
I started of with virtualbox 6.00 upgrdaded to 6.02 I have installed win 10 32 bit
into virtualbox 6.02 in setup option 32 bit which as the guest running it the win 10
which I am sure it is guest anyway , and yes win 10 32 bit does run virtualbox fine
however still a problem 16 bit games (bre) when I run it it asked me to install ntvdm
which I did, but ntvdm just crashed so you migbt be right 32 bit support isn't no longer supported
but then again same one might now how to fix that ntvdm just crashed but not e.
Thank you
According to what you have posted below, you already have proper connections.
ttl=64
I am sure that is working okay I think
Yes, it appears so.
You can also set up Virtual Box under Settings > Display > Remote
Display and use Remote Desktop Connection (vm.ip.address:port#)
and control the computer as if you were at the keyboard and
screen.
I take a note and work on this later, thank you
I use it on all my VM's so I don't have to be at the host computer to access it.
machine is actually the BBS computer running Debian Linux and one of
the guests is Windows XP and one is OS/2. Just to toy around with...
I have received a lot of help here. I am just glad I can pay it
forward.
which I did, but ntvdm just crashed so you migbt be right 32 bit support isn't no longer supported
but then again same one might now how to fix that ntvdm just crashed but not e.
Thank you
As much as I dislike Winbloz, I picked up an old HP AIO win win10-x64
and installed Virtualbox 6.02 and installed Win7-32 ... it didn't like some of the 32 bit apps (NTVDM being one of them) so I uninstalled
VB6.02 and installed VB 5.22 and win7 32 and all is well
| Sysop: | sneaky |
|---|---|
| Location: | Ashburton,NZ |
| Users: | 31 |
| Nodes: | 8 (0 / 8) |
| Uptime: | 88:22:36 |
| Calls: | 2,069 |
| Calls today: | 2 |
| Files: | 11,134 |
| Messages: | 946,757 |