From: digital.man@vert.synchro.net.remove-p5s-this

To: Brian Rogers
Re: Telnet gateway module
By: Brian Rogers to All on Thu May 06 2021 07:02 am

Greetings;

I'm trying to configure a telnet gateway to my amateur radio packet switch on port 3694 which is on the same box. While it works sorta... there's 2 issues I can't seem to figure out and can't find the info on the wiki.

1 - no local echo by default
2 - user has to hit enter twice to get their command to execute

I tried to set it up using Options = in sbbsdefs.js but no luck there, and the wiki site is offline atm. Any help is appreciated.

You could try using mudgate.js or unixgate.js or come up with your own combination of TG_* mode flags to pass on the telgate.js command-line.
http://wiki.synchro.net/module:telgate
--
digital man

This Is Spinal Tap quote #41:
Ian Faith: It say's "Memphis show cancelled due to lack of advertising funds." Norco, CA WX: 74.0øF, 57.0% humidity, 0 mph E wind, 0.00 inches rain/24hrs
--- Synchronet 3.19a-Win32 NewsLink 1.113
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: brian.rogers@1:142/103.remove-lfm-this

Greetings;

I'm trying to configure a telnet gateway to my amateur radio packet switch
on port 3694 which is on the same box. While it works sorta... there's 2 issues I can't seem to figure out and can't find the info on the wiki.

1 - no local echo by default
2 - user has to hit enter twice to get their command to execute

I tried to set it up using Options = in sbbsdefs.js but no luck there, and
the wiki site is offline atm. Any help is appreciated.

Thanks!
--- SBBSecho 3.11-Linux
* Origin: SBBS - Carnage! Hartford, Ct (1:142/103)
--- Synchronet 3.19a-Win32 NewsLink 1.113
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: brian.rogers@CARNAGE.remove-nbz-this

To: Digital Man

Digital Man wrote to Brian Rogers <=-

You could try using mudgate.js or unixgate.js or come up with your own combination of TG_* mode flags to pass on the telgate.js command-line. http://wiki.synchro.net/module:telgate --

I will have to muck around with it more. I tried unixgate and telgate. Just tried mudgate... all 3 return the same results. I'll let you know if I can
find a combination that works.

-Brian


... Gone crazy, be back later, please leave message.
--- MultiMail/Linux v0.52
þ Synchronet þ SBBS - Carnage! Telnet - bbs.n1uro.com:2300 IPv4/IPv6
--- Synchronet 3.19a-Win32 NewsLink 1.113
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: brian.rogers@CARNAGE.remove-nbz-this

To: Digital Man
I have it working. What was needed in the module was already there. I'm using SyncTERM/Linux and in the program settings I have to change the Video Output Mode to Curses. I had it set to ANSI. I tested "autodetect" and that seems to work fine too... all this at least with the mudgate module.

My node software does offer ANSI color but it's not autodetect since
most TNC softwares are just straight ascii. Those using a (ba)sh shell
may request my color schema.

Oh, in the menu I'm using "console" as the intercept i/o. Perhaps this
may help others in the future? Can't hurt.

73 de N1URO

... The number you have dailed...Nine-one-one...has been changed.
--- MultiMail/Linux v0.52
þ Synchronet þ SBBS - Carnage! Telnet - bbs.n1uro.com:2300 IPv4/IPv6
--- Synchronet 3.19a-Win32 NewsLink 1.113
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)