From: dumas.walker@CAPCITY2.remove-yri-this

Good afternoon,
I am looking for the documentation for setting up an FTN file echo so that
I can pass along files from my hub to a node that I am a hub for. I
checked the wiki and was not able to find anything, partially because I am
not sure which program it is that even handles those.

Could someone point me in the right direction? This is my first experience with FTN file echos, so don't be afraid to dumb it down, either. :)

Thanks!

---
� SLMR 2.1a � "It's a pornography store...I was buying pornography."
� Synchronet � CAPCITY2 * CCO BBS * capcity2.synchro.net:26
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: al@TRMB.remove-6bq-this

To: Dumas Walker
Re: Setting up a file echo
By: Dumas Walker to ALL on Sun May 13 2018 02:05 pm

Could someone point me in the right direction? This is my first experience with FTN file echos, so don't be afraid to dumb it down, either. :)

I have seen hatchit.js in my exec directory. I have not ever tried to use it so I can't say anything about it, aside from the fact it is there.

I just ran it with jsexec and a pick list of file areas was show, so maybe that is what you need.

Ttyl :-),
Al


... Mathematician: A device for turning coffee into theorems!

---
� Synchronet � The Rusty MailBox - Penticton, BC Canada
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: bill.mcgarrity@1:266/404.remove-gnd-this

To: Dumas Walker

Dumas Walker wrote to ALL on 05-13-18 14:05 <=-

Good afternoon,
I am looking for the documentation for setting up an FTN file echo so
that I can pass along files from my hub to a node that I am a hub for.
I checked the wiki and was not able to find anything, partially because
I am not sure which program it is that even handles those.

Could someone point me in the right direction? This is my first experience with FTN file echos, so don't be afraid to dumb it down, either. :)

If you're running Synch, you have two options. Use it's internal tickit.js and hatchit.js or, as I do, use Husky's htick.

For tickit.js, go here: http://wiki.synchro.net/module:tickit

For Husky's htick, go here: http://www.textfiles.com/fidonet-on-the-internet/husky/htick.htm#dir


--

Bill

Telnet: tequilamockingbirdonline.net
Web: bbs.tequilamockingbirdonline.net
FTP: ftp.tequilamockingbirdonline.net:2121
IRC: irc.tequilamockingbirdonline.net Ports: 6661-6670 SSL: +6697
Radio: radio.tequilamockingbirdonline.net:8010/live


... Look Twice... Save a Life!!! Motorcycles are Everywhere!!!
--- MultiMail/Win32 v0.50
* Origin: TequilaMockingbird Online - Toms River, NJ (1:266/404)
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: mark.lewis@1:3634/12.73.remove-9it-this

To: Dumas Walker

On 2018 May 13 14:05:00, you wrote to ALL:

I am looking for the documentation for setting up an FTN file echo so that I can pass along files from my hub to a node that I am a hub for. I checked the wiki and was not able to find anything, partially because I am not sure which program it is that even handles those.

mike, if tickit can operate in HUB mode, then it should do the job for you... otherwise, something like allfix (may be overkill for your needs) in files.bbs mode would work but you'll have to run a special command to update the BBS file areas from the files.bbs files...

)\/(ark

Always Mount a Scratch Monkey
Do you manage your own servers? If you are not running an IDS/IPS yer doin' it wrong...
... Death is nature's way of saying it's too late to play GEEK.
---
* Origin: (1:3634/12.73)
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: al@TRMB.remove-gs1-this

To: Dumas Walker
Re: Setting up a file echo
By: Dumas Walker to AL on Sun May 13 2018 06:38 pm

I half-way think maybe hatchit is a way to "hatch" files to others manually. I want to be able to have them come in from my hub and automatically get sent to any connections that are linked to the file echo.

Oh! I thought you wanted to hatch a file out. If you want to pass on incoming files and tics tickit will do that. :)

Ttyl :-),
Al


... Itisdifficulttobeverycreativewithonlyfiftysevencharacters

---
� Synchronet � The Rusty MailBox - Penticton, BC Canada
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: lord.time@TIME.remove-z3d-this

To: Dumas Walker

I am looking for the documentation for setting up an FTN file echo so that
I can pass along files from my hub to a node that I am a hub for. I
checked the wiki and was not able to find anything, partially because I am not sure which program it is that even handles those.

if fidonet you need to be a nc or r to pass out fdn (files) - I'em nc 340 in fidonet

Could someone point me in the right direction? This is my first experience with FTN file echos, so don't be afraid to dumb it down, either. :)

I use tinytic for inbound & allfix for outbound


---

Rob Starr
Lord Time SysOp of
Time Warp of the Future BBS
Telnet://Time.Darktech.Org:24 or
Telnet://Time.Synchro.Net:24 (qwk or ftn & e-mail)
ICQ # 11868133 or # 70398519 Jabber : lordtime2000@gmail.com
Astra : lord_time
X-Box : Lord Time 2000 Skype : lordtime@tds.net
---
� Synchronet � Time Warp of the Future BBS - Home of League 10 IBBS Games
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: dumas.walker@CAPCITY2.remove-ccn-this

To: AL

I just ran it with jsexec and a pick list of file areas was show, so maybe that
is what you need.

Well, it could be a start anyway. It showed me a list of my file areas,
not a list of files I receive from my hub. It also eventually got to an
empty menu, so I think something is missing. :)

I half-way think maybe hatchit is a way to "hatch" files to others
manually. I want to be able to have them come in from my hub and
automatically get sent to any connections that are linked to the file echo.

---
� SLMR 2.1a � Politically incorrect...and proud of it!!!
� Synchronet � CAPCITY2 * CCO BBS * capcity2.synchro.net:26
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: mark.lewis@1:3634/12.73.remove-9it-this

To: Dumas Walker

On 2018 May 13 18:38:00, you wrote to AL:

I just ran it with jsexec and a pick list of file areas was show, so
maybe that is what you need.

Well, it could be a start anyway. It showed me a list of my file
areas, not a list of files I receive from my hub. It also eventually
got to an empty menu, so I think something is missing. :)

sounds like it doesn't know what areas are networked together...

)\/(ark

Always Mount a Scratch Monkey
Do you manage your own servers? If you are not running an IDS/IPS yer doin' it wrong...
... Judgement of beauty can err, what with the wine & the dark.
---
* Origin: (1:3634/12.73)
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: mark.lewis@1:3634/12.73.remove-9it-this

To: Lord Time

On 2018 May 13 22:17:52, you wrote to Dumas Walker:

I am looking for the documentation for setting up an FTN file echo so
that I can pass along files from my hub to a node that I am a hub for.
I checked the wiki and was not able to find anything, partially because
I am not sure which program it is that even handles those.

if fidonet you need to be a nc or r to pass out fdn (files) - I'em nc
340 in fidonet

dude! bullshit! totally false... anyone can pass files... where are you getting these wrong ideas from????? i was hubbing files and messages long before i became a *C...

)\/(ark

Always Mount a Scratch Monkey
Do you manage your own servers? If you are not running an IDS/IPS yer doin' it wrong...
... Death: To stop sinning suddenly.
---
* Origin: (1:3634/12.73)
--- Synchronet 3.17a-Win32 NewsLink 1.109
* Vertrauen - Riverside County, California - telnet://vert.synchro.net

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)