From: nospam.IB.Joe@f201.n342.z1.fidonet.org

I have been trying to get SSH to work with my Mystic BBS, the pi version. Problem is is that I'm new to Linux and the instructions, or what I thought were instructions did not yield a good result.

Can someone assist me in how to install the files needed so that I may use SSH on my BBS??

Thanx

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-=JoesBBS.com=-

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: nospam.Jay.Harris@f664.n229.z1.fidonet.org

On 06 Feb 2021, IB Joe said the following...

Can someone assist me in how to install the files needed so that I may
use SSH on my BBS??

I have SSH working on my Pi. I just followed the directions here and it seemed to work for me:

http://wiki.mysticbbs.com/doku.php?id=cryptlib

Make sure you have the programs needed to compile installed:

sudo apt-get update
sudo apt-get install build-essential manpages-dev

Download cryptlib from the authors:

cd /tmp
wget https://cryptlib-release.s3-ap-southeast-1.amazonaws.com/cryptlib345.zip

Unzip the archive and build:

unzip -a cryptlib345.zip
sudo make shared

Move the file into place:

sudo mv libcl.so.3.4.5 /usr/lib/libcl.so

Now as long as SSH is enabled in ./mustic -cfg, you should be able to restart mis with that in place and it should just work.


Jay

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)

From: nospam.IB.Joe@f201.n342.z1.fidonet.org

On 06 Feb 2021, Jay Harris said the following...

On 06 Feb 2021, IB Joe said the following...

Can someone assist me in how to install the files needed so that I ma use SSH on my BBS??

I have SSH working on my Pi. I just followed the directions here and it seemed to work for me:

http://wiki.mysticbbs.com/doku.php?id=cryptlib

Make sure you have the programs needed to compile installed:

sudo apt-get update
sudo apt-get install build-essential manpages-dev

Download cryptlib from the authors:

cd /tmp
wget https://cryptlib-release.s3-ap-southeast-1.amazonaws.com/cryptlib345.zip

Unzip the archive and build:

unzip -a cryptlib345.zip
sudo make shared

Move the file into place:

sudo mv libcl.so.3.4.5 /usr/lib/libcl.so

Now as long as SSH is enabled in ./mustic -cfg, you should be able to restart mis with that in place and it should just work.

Thank you Jay... followed your instructions and had it operational in a few minutes.

IB Joe
AKA Joe Schweier
SysOp of Joe's BBS
-=JoesBBS.com=-

--- SoupGate-Win32 v1.05
* Origin: www.darkrealms.ca (1:229/2)