CMECH wrote to BL00D <=-

Is the node defined in Allfix? Is the node connected to the file area
as a Receive node?

Yes, In allfix I have an AKA as 1:19/50.1, I have the file echo setup
using that AKA, it is set to receive (only) from 1:19/50. I've gone
over the setup several times and everything looks fine. My next plan
would be just to setup allfix from scratch. But I wanted to see if
anyone saw something that I was blind to.

Thanks,

Kev

--- Telegard/2/QWK v3.09.g2-sp4/mL
* Origin: Razor's Domain/2 BBS (21:1/162.1)

* An ongoing debate between bl00d and Cmech rages on ...

Is the node defined in Allfix? Is the node connected to the file
area as a Receive node?

Yes, In allfix I have an AKA as 1:19/50.1, I have the file echo setup using that AKA, it is set to receive (only) from 1:19/50. I've gone
over the setup several times and everything looks fine. My next plan
would be just to setup allfix from scratch. But I wanted to see if
anyone saw something that I was blind to.

Make sure nothing has been set to Inactive/Disabled/etc. {shrug}

According to the log the node can't be found for some reason, or is getting set

to null from the Tic file ...


.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ |
| | `------------ WildCat! BBS 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... Law of Combat: No combat-ready unit has ever passed inspection.
--- GoldED+/LNX v1.1.5-b20170303 under Kubuntu via Mystic BBS!
* Origin: FSXNet - Positronium #2: telnet://cmech.dynip.com:2323 (21:2/120)

*
* On 21 Jul 17 at 19:43,
* bl00d said to Cmech,
* about Re: File tossing to point ...
*

Did you try setting up the point as an actual node instead of an Aka and define

the node as a Receive for that Area? Just a thought :)


.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ |
| | `------------ WildCat! BBS 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... I can't believe it's not bacon!
--- GoldED+/LNX v1.1.5-b20170303 under Kubuntu via Mystic BBS!
* Origin: FSXNet - Positronium #2: telnet://cmech.dynip.com:2323 (21:2/120)

hi from houston check the case of the password matches use upper and less
than 8 chars

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Agency BBS | telnet://agency.bbs.geek.nz (21:1/101)

Cmech wrote to bl00d <=-

* An ongoing debate between bl00d and Cmech rages on ...

According to the log the node can't be found for some reason, or is getting set

Yea, that is what is confusing me. It states "undefined node" but
doesn't show any node number, so it's like something in the TIC is
wrong, but TIC looks fine. It's more than just this echo, it's any echo
that I try to send to the point, all networks (fido/fsx/others).

I'll keep messing with it. My plan next is the manually modify the TIC
files to try to get it to accept it. Then backtrack where the issue is.

Thanks!

Kev

___ MultiMail/Win32 v0.49

--- Mystic BBS/QWK v1.12 A33 (Raspberry Pi/32)
* Origin: Razor's Domain 3.141592... (21:1/162)

Cmech wrote to bl00d <=-

Did you try setting up the point as an actual node instead of an Aka
and define

the node as a Receive for that Area? Just a thought :)

Well, I do have fidonet setup as the actual node and I get the same
results with any fileecho on fidonet. But I probably should be testing
with that and not AKA's to try to track down the issue. Thanks for
that.

Kev

___ MultiMail/Win32 v0.49

--- Mystic BBS/QWK v1.12 A33 (Raspberry Pi/32)
* Origin: Razor's Domain 3.141592... (21:1/162)

the node as a Receive for that Area? Just a thought :)

I finally tracked it down. Apparently it was some corrupt setup files or something similar.

I found out there was an upgrade (I was running .18 and there was a .24), so I upgraded and when I appempted to toss I got better info in the logs. As I tried to fix things (node numbers, etc) I was getting "corrupted file" errors. So I just started from scratch and it is tossing files fine now.

Thanks for taking the time to help me try to figure this out :)

Kev

--- Mystic BBS v1.12 A33 (Raspberry Pi/32)
* Origin: Razor's Domain 3.141592... (21:1/162)

* An ongoing debate between bl00d and Cmech rages on ...

I finally tracked it down. Apparently it was some corrupt setup files
or something similar.

Good job :)

Thanks for taking the time to help me try to figure this out :)

Welcome, anytime


.- Keep the faith, --------------------------------------------------.
| |
| Ben aka cMech Web: http|ftp|binkp|telnet://cmech.dynip.com |
| Email: fido4cmech(at)lusfiber.net |
| Home page: http://cmech.dynip.com/homepage/ |
| | `------------ WildCat! BBS 24/7 +1-337-984-4794 any BAUD 8,N,1 ---'

... We found the wisdom not to destroy ourselves.
--- GoldED+/LNX v1.1.5-b20170303 under Kubuntu via Mystic BBS!
* Origin: FSXNet - Positronium #2: telnet://cmech.dynip.com:2323 (21:2/120)