G00r00,

So I found my ip for my sprint cell was listed in dnsbl. If set to on, it blacklisted me everytime. Any idea how to fix that?

#2,

The Linux NNTP server seems to crash when you subscript in your client to a
new area, then pull first time. You restart and pull and it seems to work
fine for a pretty long while.

Thanks


--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

This happens in my iPhone app of the below app: yrnews.

It has been running fine since I subscribed and added the channels.

I used to use this same app with windows mystic and it never gave an issue. Only started since I used Linux.

Hope that helps a bit!
Thanks g00r00!



On 18:47 28/05 , Nugax wrote:

G00r00,

So I found my ip for my sprint cell was listed in dnsbl. If set to on, it >blacklisted me everytime. Any idea how to fix that?

#2,

The Linux NNTP server seems to crash when you subscript in your client to a >new area, then pull first time. You restart and pull and it seems to work >fine for a pretty long while.

Thanks

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

G00r00,

So I found my ip for my sprint cell was listed in dnsbl. If set to on, it blacklisted me everytime. Any idea how to fix that?

This isn't something I can fix; it is pretty common I hear with mobile
networks for someone to do something that gets their IP added to the block list.

If you want it removed you'd have to create a ticket with your blacklist service that you are using.

You could also add the IP to the whitelist so that Mystic will always accept it, even when blocked by DNS blacklists.

The Linux NNTP server seems to crash when you subscript in your client
to a new area, then pull first time. You restart and pull and it seems
to work fine for a pretty long while.

Do you have a log you can send over? I think the NNTP logs show the client server interaction so that I can test.

--- Mystic BBS v1.12 A34 (Windows/64)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

Sure let me dig some up. Post here?

On 11:06 30/05 , g00r00 wrote:

G00r00,

So I found my ip for my sprint cell was listed in dnsbl. If set to on, it blacklisted me everytime. Any idea how to fix that?

This isn't something I can fix; it is pretty common I hear with mobile >networks for someone to do something that gets their IP added to the block >list.

If you want it removed you'd have to create a ticket with your blacklist >service that you are using.

You could also add the IP to the whitelist so that Mystic will always accept >it, even when blocked by DNS blacklists.

The Linux NNTP server seems to crash when you subscript in your client
to a new area, then pull first time. You restart and pull and it seems
to work fine for a pretty long while.

Do you have a log you can send over? I think the NNTP logs show the client >server interaction so that I can test.

--- Mystic BBS v1.12 A34 (Windows/64)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

g00r00,

I replicated the issue. Here is the exact output when the newly subscribed
area was refreshed for messages:

^Ccadams@byte-bbs:~/mystic/logs$ tail -f server_nntp.log May 31 18:16:24 1 S:Marvel.Cinematic.Universe 1 0 yMay 31 18:16:24 1 S:DC.Movies/Shows 1 0 yMay 31 18:16:24 1 S:Star.Wars.RPG 1 0 yMay 31 18:16:24 1 S:Star.Wars.Computer/Console.Gaming 1 0 yMay 31 18:16:24 1 S:Discussion.of.the.Game/Series:.Defiance 1 0 yMay 31 18:16:24 1 S:BattleTech
1 0 yMay 31 18:16:24 1 S:CityTech 1 0 yMay 31 18:16:24 1 S:AeroTech 1 0 yMay
31 18:16:24 1 S:Dungeons.And.Dragons.games 1 0 yMay 31 18:16:24 1 S:.May 31 18:16:50 0 Connection from United StatesMay 31 18:16:50 0 Connect:
66.87.97.59 (66-87-97-59.pools.spcsdns.net)May 31 18:16:50 1 S:200 Mystic BBS NNTP server readyMay 31 18:16:50 1 C: AUTHINFO user nugaxMay 31 18:16:50 1 S:381 Password requiredMay 31 18:16:50 1 C: AUTHINFO PASS ***May 31 18:16:50
1 S:281 Authentication acceptedMay 31 18:16:50 1 Logged in as nugaxMay 31 18:16:50 1 C:group "How.To".Prepare/Build/Maintain.EquipmentMay 31 18:16:51 1 C:xover 0-0


----

Then it times out, and I have to completely restart the entire server. I
killed the mis process and restarted and still couldnt connect over telnet. After a reboot, it did connect.

This has happened for quite a while, but I have only seen it on Linux.

Thanks,



-Nugax

--- Mystic BBS v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

On 05/28/17, Nugax said the following...

So I found my ip for my sprint cell was listed in dnsbl. If set to on, it blacklisted me everytime. Any idea how to fix that?

Add the IP to goodip.txt. That will do.

The Linux NNTP server seems to crash when you subscript in your client
to a new area, then pull first time. You restart and pull and it seems
to work fine for a pretty long while.

You should check your logs, but most NNTP clients will send the command "MODE READER" upon connecting, which by the standards is not mandatory, but sometimes the server gets a little confused by it. Usually it answers with a "500 Unknown Command", but take a look at the logs, that might be the case,
as sometimes the client does not "like" that kind of answer and starts
lagging after it.

Try also with the client I use, it's called NewsTap.

--- Mystic BBS v1.12 A33 (macOS/64)
* Origin: Chiron, experimental system - Brazil (21:1/146.1)

Thanks

On 16:26 07/06 , Nighthawk wrote:

On 05/28/17, Nugax said the following...

So I found my ip for my sprint cell was listed in dnsbl. If set to on, it blacklisted me everytime. Any idea how to fix that?

Add the IP to goodip.txt. That will do.

The Linux NNTP server seems to crash when you subscript in your client
to a new area, then pull first time. You restart and pull and it seems
to work fine for a pretty long while.

You should check your logs, but most NNTP clients will send the command
"MODE READER" upon connecting, which by the standards is not mandatory, but >sometimes the server gets a little confused by it. Usually it answers with a >"500 Unknown Command", but take a look at the logs, that might be the case, >as sometimes the client does not "like" that kind of answer and starts >lagging after it.

Try also with the client I use, it's called NewsTap.

--- Mystic BBS v1.12 A33 (macOS/64)
* Origin: Chiron, experimental system - Brazil (21:1/146.1)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

g00r00,

Can you code something into NNTP servers so that if they get that command,
the server won't crash? Probably can just ignore it.

That would fix my issue with the NNTP server.



On 11:24 08/06 , Nugax wrote:

Thanks

On 16:26 07/06 , Nighthawk wrote:

On 05/28/17, Nugax said the following...

So I found my ip for my sprint cell was listed in dnsbl. If set to on, it
blacklisted me everytime. Any idea how to fix that?

Add the IP to goodip.txt. That will do.

The Linux NNTP server seems to crash when you subscript in your client >> Nu> to a new area, then pull first time. You restart and pull and it seems >> Nu> to work fine for a pretty long while.

You should check your logs, but most NNTP clients will send the command >>"MODE READER" upon connecting, which by the standards is not mandatory, but >>sometimes the server gets a little confused by it. Usually it answers with a >>"500 Unknown Command", but take a look at the logs, that might be the case, >>as sometimes the client does not "like" that kind of answer and starts >>lagging after it.

Try also with the client I use, it's called NewsTap.

--- Mystic BBS v1.12 A33 (macOS/64)
* Origin: Chiron, experimental system - Brazil (21:1/146.1)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

g00r00,

Can you code something into NNTP servers so that if they get that
command, the server won't crash? Probably can just ignore it.

What is the client/?

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

I use this NNTP client. There are only one or two for iPhones and this one is easiest...

On 09:51 10/06 , g00r00 wrote:

g00r00,

Can you code something into NNTP servers so that if they get that command, the server won't crash? Probably can just ignore it.

What is the client/?

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

Can you code something into NNTP servers so that if they get that command, the server won't crash? Probably can just ignore it.

I use this NNTP client. There are only one or two for iPhones and this
one is easiest...

What is the client/?

yrNews Usenet Reader for iOS

Okay, but it appears to work? But you are saying its crashing?

I am confused as to what is going on.

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

Yes, it crashes everytime i add a new message area to my client then pull messages.

I have to completely restart the Linux machine to get it to work again.



On 21:49 10/06 , g00r00 wrote:

Can you code something into NNTP servers so that if they get that command, the server won't crash? Probably can just ignore it.

I use this NNTP client. There are only one or two for iPhones and this one is easiest...

What is the client/?

yrNews Usenet Reader for iOS

Okay, but it appears to work? But you are saying its crashing?

I am confused as to what is going on.

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

Yes, it crashes everytime i add a new message area to my client then pull messages.

I can confirm that I have the same problem. Using the news reader app on
the iphone appears to crash the mis service. What I have discovered is that
if you limit the number of requests from the client to 100 and set the number of connections to 101 on the NNTP service, things improve a bit. The iphone app is downloading the complete message and not just reading the headers. So it appears to be making a lot of connections, very quickly, which overload
the MIS service??? or something else...

But limiting to 100 connections it does not work every time and the MIS services appears to get into some kind of BUZY status. You can no longer connect and you receive the BUZY message. Only a restart of the MIS service will fix that.

I use the NewsTap App. Running Mystic A33 on Ubuntu 16.04.

Kate.

---------------
Flower BBS
telnet: bbs.homeip.net
fsxNet: 21:2/123

--- Mystic BBS v1.12 A33 (Linux/64)
* Origin: Flower BBS (21:2/123)

Yes, it crashes everytime i add a new message area to my client then pull messages.

I have to completely restart the Linux machine to get it to work again.

Okay thanks. If you haven't already can you e-mail me a readable log from
the NNTP server when it crashes?

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

I use the NewsTap App. Running Mystic A33 on Ubuntu 16.04.

Thank you I don't have an iDevice to test with, but I will see what I can do
to get some good stability testing done to MIS and MIS2 in Windows and Linux.

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

I posted it here a while back but I can email
It

On 04:05 11/06 , g00r00 wrote:

Yes, it crashes everytime i add a new message area to my client then pull messages.

I have to completely restart the Linux machine to get it to work again.

Okay thanks. If you haven't already can you e-mail me a readable log from >the NNTP server when it crashes?

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

Thanks!

On 11:53 11/06 , g00r00 wrote:

I use the NewsTap App. Running Mystic A33 on Ubuntu 16.04.

Thank you I don't have an iDevice to test with, but I will see what I can do >to get some good stability testing done to MIS and MIS2 in Windows and Linux.

--- Mystic BBS v1.12 A34 (Windows/32)
* Origin: Sector 7 [Mystic BBS WHQ] (21:1/108)

--
yrNews Usenet Reader for iOS
http://appstore.com/yrNewsUsenetReader

--- Mystic BBS/NNTP v1.12 A33 (Linux/64)
* Origin: -=The ByteXchange BBS : bbs.thebytexchange.com=- (21:1/107)

On 06/08/17, Nugax said the following...

Thanks

You're welcome! Let me know if you need help.

----
Regards from Nighthawk - AKA Flavio Bessa
Sysop of Saturn's Orbit BBS - Rio de Janeiro, Brazil
fcbessa@gmail.com - saturnsorbit.hopto.org

--- Mystic BBS v1.12 A34 (macOS/64)
* Origin: Chiron, orbiting Saturn - Chile (21:1/146.1)

On 06/10/17, g00r00 said the following...

g00r00,

Can you code something into NNTP servers so that if they get that command, the server won't crash? Probably can just ignore it.

What is the client/?

He has been using the yrNews client for iOS.

----
Regards from Nighthawk - AKA Flavio Bessa
Sysop of Saturn's Orbit BBS - Rio de Janeiro, Brazil
fcbessa@gmail.com - saturnsorbit.hopto.org

--- Mystic BBS v1.12 A34 (macOS/64)
* Origin: Chiron, orbiting Saturn - Chile (21:1/146.1)