• before the walls and home is completely built

    From Ogg@21:4/106.21 to Weatherman on Sunday, March 29, 2020 11:52:00
    Hello Weatherman!

    ** 25.03.20 - 13:28, Weatherman wrote to Vk3jed:

    There's a good chance I may be getting a house built later this year. If
    that comes to pass. I'll definitely be getting Ethernet cabling pre
    installed, so I can have solid wired infrastructure in every room.

    Sounds great! Much easier to run the wires before the walls and home is
    completely built.

    I did all the ethernet drops before out basement was finished which made
    some of the work easier. The rest, I used an old gas hot water heater
    exhaust as a conduit to get everything to the attic and then down the 2nd
    floor walls.

    Reminds me of my house, before the walls were finished and and before the front door was attached, my upright piano was hauled in and up a semi-
    flight of stairs, around a small turn and into the main living room.

    Now, there is no way to get the piano out (which I would like to do)
    without taking it apart piece by piece.


    --- OpenXP 5.0.43
    * Origin: [} Pointy McPointFace (21:4/106.21)
  • From Weatherman@21:1/132 to Ogg on Sunday, March 29, 2020 13:36:57

    Reminds me of my house, before the walls were finished and and before the front door was attached, my upright piano was hauled in and up a semi- flight of stairs, around a small turn and into the main living room.

    Now, there is no way to get the piano out (which I would like to do)
    without taking it apart piece by piece.

    Was just recently wondering how people had pianos put in their homes. Sounds like once they are in, they are in forever unless you somehow take it completely apart.

    - Mark
    ˙˙˙
    --- WWIVToss v.1.52
    * Origin: http://www.weather-station.org * Bel Air, MD -USA (21:1/132.0)
  • From Ogg@21:4/106.21 to Weatherman on Sunday, March 29, 2020 22:33:00
    Hello Weatherman!

    ** 29.03.20 - 13:36, Weatherman wrote to Ogg:

    Now, there is no way to get the piano out (which I would like to do)
    without taking it apart piece by piece.

    Was just recently wondering how people had pianos put in their homes.
    Sounds like once they are in, they are in forever unless you somehow take
    it completely apart.

    Most pianos can be manoeuvered well enough. In my case the piano was
    hauled in before the stair railing was attached and before all the studs
    in one particular wall were installed. We just passed the piano through
    the pre-studed wall as a shortcut. And, the floors were still bare
    plywood at the time. So, any scuffs or drag marks were of no consequence.

    It's a solid oak upright. It's a shame to have to take it apart, but quite frankly there is no other option. I imagine that maybe a couple pieces could be repurposed for shelving or a couple of table tops.

    --- OpenXP 5.0.43
    * Origin: [} Pointy McPointFace (21:4/106.21)
  • From Spectre@21:3/101 to Ogg on Monday, March 30, 2020 15:40:00
    It's a solid oak upright. It's a shame to have to take it apart, but quite frankly there is no other option. I imagine that maybe a couple pieces

    Is she a timber frame or steel frame job? If you want to keep it post moving it, I'd say you just need a piano man. Those things will disassemble a long
    way with a minimum of fuss. Trouble is they're like a jigsaw to put back together.

    Its not for nothing, that in the dem good ol' days you used to have a load bearing beam hanging out the gable end with a pair of doors behind it. You could get unwieldy furniture in and out that way. Depending on your house construction it might still be possible to do someting similar.

    Back in the first house I ever bought, we ended up taking out a window to get ¨a wardrobe into a room. It was a sexy art deco thing fitted with the home ¨reno nicely. But she was a big beast... didn't want to get through the door ¨going down the hallway.

    Spec

    --- SuperBBS v1.17-3 (Eval)
    * Origin: Scrawled in haste at The Lower Planes (21:3/101)
  • From Spectre@21:3/101 to Ogg on Monday, March 30, 2020 15:40:00
    It's a solid oak upright. It's a shame to have to take it apart, but quite frankly there is no other option. I imagine that maybe a couple pieces

    Is she a timber frame or steel frame job? If you want to keep it post moving it, I'd say you just need a piano man. Those things will disassemble a long
    way with a minimum of fuss. Trouble is they're like a jigsaw to put back together.

    Its not for nothing, that in the dem good ol' days you used to have a load bearing beam hanging out the gable end with a pair of doors behind it. You could get unwieldy furniture in and out that way. Depending on your house construction it might still be possible to do someting similar.

    Back in the first house I ever bought, we ended up taking out a window to get a
    wardrobe into a room. It was a sexy art deco thing fitted with the home reno nicely. But she was a big beast... didn't want to get through the door going down the hallway.

    Spec

    --- SuperBBS v1.17-3 (Eval)
    * Origin: Scrawled in haste at The Lower Planes (21:3/101)
  • From Ogg@21:4/106.21 to Spectre on Friday, April 10, 2020 11:24:00
    Hello Spectre!

    ** 30.03.20 - 15:40, Spectre wrote to Ogg:

    It's a solid oak upright. It's a shame to have to take it apart, but
    quite frankly there is no other option. I imagine that maybe a couple
    pieces

    Is she a timber frame or steel frame job? If you want to keep it post
    moving it, I'd say you just need a piano man. Those things will disassemble
    a long way with a minimum of fuss. Trouble is they're like a jigsaw to put
    back together.

    Yeah.. a piano mover would probably be the normal way to do it. But my situation is not normal. There is actually a discarded couch in front of
    the piano now. The couch is the folding-bed types - very heavy! It too
    needs to be dismantled inorder to be removed.

    When the house was being built, we (I) couldn't decide the best location
    for it. The location of the load bearing beams relied on that decision,
    so my dad (who was the principal carpenter/builder of the house) decided
    that the best thing to do was to put in the floor-beams in a diagonal:

    +---------------- d+w -----------+
    | ---1--- |
    | Dining room --|
    w --/--|
    | --/--/| |
    | --/--/ | |
    +--------- d -----| --/--/ 2 |
    |-/--/ | |
    |-/ | |
    || Living |
    Kitchen |3 Room |
    || |
    || |
    | |
    +-------- d -----+

    Legend:

    w = window
    d = door
    1 = piano
    2 = piano
    3 = piano

    The piano has found its way in ALL three locations over the years!

    It is presently in location 3.

    (BTW.. the drawing was super easy with textik.com)


    Back in the first house I ever bought, we ended up taking out a window to
    get a wardrobe into a room. It was a sexy art deco thing fitted with the
    home reno nicely. But she was a big beast... didn't want to get through the
    door going down the hallway.


    Typically, hallways in most home designs were narrow (to maximize useable space for the actual rooms). My mom was the architect for this house, and she wanted wide hallways. Moving traditional furniture in and out was made easy.

    --- OpenXP 5.0.43
    * Origin: [} Pointy McPointFace (21:4/106.21)