That would be great & appreciated. Am currently working on the binkd.cfg on my windows box. This way...I can compare what I do with yours.
I'll import it below with a few example node lines. Watch out for long lines.. they'll wrap..
If you have questions just ask..
# Binkd sample configuration file
# Copyright (C) 1996-1997 by Dima Maloff, 2:5047/13
# $Id: binkd.conf,v 1.3 2012/01/22 13:54:12 green Exp $
#
# Path and name for the logfile, loglevel
#
log /usr/local/fido/log/binkd.log
loglevel 4
#
# Your FTN domains:
# domain <name> <main-outbound> <default-zone> [<root-domain>]
# or
# domain <new-name> alias-for <name>
# First specified domain sets as default domain for the 3D/4D addresses.
#
domain fidonet /usr/local/fido/outbound 1 domain fsxnet /usr/local/fido/outbound 1
#
# Aliases to support known wrong 5D configurations
domain fido alias-for fidonet
domain fidorus alias-for fidonet
domain fido7 alias-for fidonet
#
# Aliases to support known DNS domain zones
# (some people is mix up the terms "FTN domain" and "DNS internet domain") domain fidonet.org alias-for fidonet domain fidonet.net alias-for fidonet
#
# Your addresses, 5D or 4D or 3D:
# address <addr1> ...
# If first address specified as 3D/4D then domain for it sets from domain
# defined in the first "domain" token. If second and more addresses specified
# as 3D/4D then domain sets from first address.
#
address 1:153/757@fidonet
address 1:153/0@fidonet
address 21:4/106@fsxnet
#
# Hide or present the specified AKAs if remote AKAs match the address mask
# hide-aka <my-aka> [!]<mask>
# present-aka <add-aka> [!]<mask>
# Mask is compared to the 5d-form of address string, `*' matches any number
# of any symbols (so you have to write '2:5020/*' but not '5020/*')
# Use `!' to invert the mask
# These rules apply in the same order as in config, you can present any address #
#hide-aka 2:5020/999.* !2:*@fidonet # hide aka from all but fido zone 2 #hide-aka 21:4/106 !21:*@fsxnet
#present-aka 2:5047/999.1 2:5047/*.0* # present aka to all nodes in 2:5047
#
# The name of your system, its location and your name
#
sysname "The Rusty MailBox"
location "Penticton, BC Canada"
sysop "Alan Ianson"
#
# System capabilities
#
nodeinfo 115200,CM,XX,IBN
#
# Uncomment it if you want binkd's log at your console
#
conlog 4
#
# If a log message matches one of these masks it won't be written to log
# (masks are in shell/glob style, case-insensitive)
#
nolog "*socket # [0-9]*"
nolog "*.[bc]sy"
#
# Uncomment if you want T-Mail(FrontDoor)-style binary log
# (Will work and have sense on PCs only?)
#
#binlog binkd.sts
#fdinhist in.his
#fdouthist out.his
#
# TCP settings. Leave this unchanged if not sure.
#
# Suffixes for time intervals are w for weeks, d for days,
# h for hours, m for minutes, s or no suffix for seconds.
# You can mix the suffixes, i.e. 1d12h is the same as 36h.
#
#iport binkp
#oport binkp
#oblksize 4096
#timeout 30s
#connect-timeout 30s
#bindaddr 192.168.0.3
#
# Zlib compression parameters (if built with zlib support)
# zlevel - compression level (zlib only, bzlib2 uses 100kb always) ,
# set to 0 to use default value of 6
# zminsize <size> - files smaller than <size> won't be compressed anyway
# Rules:
# zallow <mask1>[ <mask2>... <maskN>] - allow compression for the masks
# zdeny <mask1>[ <mask2>... <maskN>] - deny compression for the masks
# If remote accepts compressed blocks (OPT GZ) its name will be checked
# against these rules before sending each file. If the name matches a zallow
# rule the file will be sent with compression. If the name matches a zdeny rule # it will be sent as-is. The rule matched first is applied. If a file doesn't
# match any rule zdeny is assumed.
#
zminsize 1024
#
zallow *.pkt *.PKT
zdeny *.su? *.mo? *.tu? *.we? *.th? *.fr? *.sa? zdeny *.zip *.rar *.arj *.ha *.gz *.tgz *.bz2 *.z[0-9][0-9] *.r[0-9][0-9] zallow *
#
# Compression dll names, for win32 versions built with ZLIBDL
#
#zlib-dll zlib.dll
#bzlib2-dll bzlib2.dll
#
# HTTPS or SOCKS settings.
#
# proxy 192.168.0.3:3128 # <- regular http/https proxy (i.e. squid)
# proxy 192.168.0.3:3128/user/password # <- proxy required username/password
# # (as in browser)
#
# proxy 192.168.0.3:3128/user/password/your_host/your_domain
# ^- proxy required NTLM authorization with username/password
# your_host -- Windows host name without domain (i.e. MY_HOST)
# your_domain -- Windows domain name (not FQDN, i.e. DEFAULT_DOMAIN)
#
# socks 192.168.0.3:1080 # <- socks4 proxy
# socks 192.168.0.3:1080/ # <- socks5 proxy without authorization
# socks 192.168.0.3:1080/user/password # <- socks5 proxy with username/passwor d
# # (RFC-1929)
#
# Delay of calls and outbound rescans in seconds
#
call-delay 30s
rescan-delay 30s
#
# Max. number of inbound/outbound connections
#
#maxservers 2
#maxclients 2
#
# Binkd will try to call a node N times. If failed it will
# hold the node for S seconds. The feature is off by default.
#
try 2
hold 3h
#
# hold-skipped <S>
# Binkd will hold for S seconds all mail skipped by a node. (Def. -- 1h)
#
#hold-skipped 1h
#
# Don't send (only receive) files if no password for an inbound session
#
#send-if-pwd
# Tzoff corrects UTC time returned by time() under DOS-derived OS
# Using system TZ variable or tzselect(8) is preferred.
#tzoff 3h
#
# Use syslog (Only if made with -DHAVE_VSYSLOG and -DHAVE_FACILITYNAMES)
#
#syslog local0
#
# Print percents while sending or receiving
#
percents
#
# List queue after rescans
#
printq
#
# Perform reverse resolving (for logging only)
#
backresolv
#
# Log pid:
#
pid-file /usr/local/fido/binkd.pid
#
# Map paths in flo's:
# ftrans <old-string> <new-string>
# Use as many ftrans's as you want.
#
#ftrans "D:\\fido\\outbound" "/var/spool/fido/outb"
#ftrans "\\" "/" # this replaces all slashes in a path
#
# Inbound directories for secure and non-secure links
#
inbound /usr/local/fido/inbound
inbound-nonsecure /usr/local/fido/inbound/insecure
#
# Directory for incomplete receiving files (.hr and .dt),
# default to inbound for the node
#
temp-inbound /usr/local/fido/inbound/tmp
#
# Binkd will skip all files from a node if
# size_of_the_next_file_for_us_there + minfree < free_space_in_inbound
# The zero value and the value 4294967295 (2**32-1) is equivalented to infinity .
#
minfree 2048
minfree-nonsecure 2048
#
# When trying to receive a new file: remove partial files with this
# name but different size or time from inbound. (If commented out, binkd
# will left old parts as .dt and .hr in the inbound directory)
#
kill-dup-partial-files
#
# Remove all old partial files from inbound. (OFF if commented out)
# kill-old-partial-files <max-age-in-seconds>
#
kill-old-partial-files 1d
#
# Remove old .bsy/.csy files (If some are left after a system crash). It would # be wise to set this to 12h on almost any system. (Note that binkd always
# touches .bsy's/.csy's for active sessions)
#
# kill-old-bsy is OFF by default.
#
kill-old-bsy 12h
#
# Create a flag file after receiving a file
#
#flag /sbbs/data/fidoin.now *.pkt *.PKT
#flag /sbbs/data/fidoin.now *.su? *.SU? *.mo? *.MO? *.tu? *.TU? *.we? *.WE? *.t h?
*.TH? *.fr? *.FR? *.sa? *.SA?
#flag /sbbs/data/tickit.now *.tic *.TIC
#
# Run an external program.
# The "*S" macro in command line substed with S.R.I.F., see !SRIF.TXT
# The "!" before program pathname means immediate program execution
# after receiving the file.
# *** win32 only:
# The "@" before program pathname means execute program in separate console
# The "@@" before program pathname means execute program in hidden console
# ***
# Macros: *F - complete name of received file,
# *A0..*A9 - first 10 AKA of remote system,
# *A*, *A@ - list of all remote AKA separated by spaces
# *P - password protected [0|1],
# *L - listed system [0|1]
# *H - remote hostname or IP,
# *N - short file name (win32 only).
#
exec "/usr/local/bin/hpt-incoming.sh" *.[pP][kK][tT] *.[STFWMstfwm][ouaherOUAHE
R]
[0-9A-Za-z] *.[tT][iI][cC]
exec "mfreq-srif -s *S" *.req
#exec "my-pkt-unpacker /options *S" *.pkt
#exec "my-tosser /options" c:\\bbs\\inbound\\????????.[mwtfs][oehrau][0-9a-zA- Z]
#exec "nice -n 19 hpt toss link" /var/spool/ftn/inbound/*.[STFWMstfwm][ouaherOU AH
ER][0-9A-Za-z] *.[pP][kK][tT]
#
# Include a file
#
#include /etc/ftn/binkd.inc
#
# Overrides root domain for DNS lookups, see `node' below.
#
root-domain binkp.net
#
# Scan T-Mail boxes (short and long)
#
#filebox d:\\fido\\tmail\\boxes
#
# Scan theBrake! long boxes
#
#brakebox d:\\fido\\brake\\boxes
#brakebox /var/spool/ftn/longbox
#
# Should binkd delete empty boxes?
# Uncomment the following line, if yes
#
#deletebox
#
# Scan node outbound while connecting and send mail size to remote
#
prescan
# t-mail or ifcico (qico) password file.
# Format of the password file:
# [password] <FTN address> <inpwd>[,[<pktpwd>][,<outpwd>]]
# where:
# [password] optional "password" token;
# <FTN address> address of a link in the form 1:2/3.4@domain
# or 1:2/3@domain or 1:2/3 or 1:2/3.4;
# <inpwd> password for incoming sessions;
# <pktpwd> packet password, used when "share" token
# is handled;
# <outpwd> password for outgoing sessions.
# Any password is one word without spaces or tabs. If <pktpwd> or <outpwd>
# is omitted, it is assumed equal to <inpwd>. If a password is defined for
# a node by the "node" token then the passwords for the node in the password
# file are ignored.
#
#passwords /etc/ftn/passwords
#
# Skip files:
# skip [all|listed|unlisted|secure|unsecure] [!]<sizeKb>|- <mask>...
#
# 'all' applies to all sessions (default)
# 'listed' applies to sessions with the nodes defined by 'node' keyword
# 'secure' applies to password-protected sessions
#
# Use '!' before size for destructive skip, default is non-destructive one.
# If <size> > 0 then only files larger than <size> in kilobytes are skipped,
# zero <size> applies to all files,
# if <size> is set to '-' then the rule allows any file by <mask>'s
#
# <mask> is a shell-style mask, case-insensitive (except for symbols in [])
# multiple masks for a rule are permitted
#
# Policy for rule processing is first-match
#
#skip all 0 *.mp3 *.avi
#skip unsecure 256 *.pkt
#skip unsecure !0 *
#
# Overwrite the existing file by the new received,
# do not save with the changed extension
#
#overwrite net_*.*
#
# Inbound filename case:
# inboundcase [save(default)|upper|lower|mixed]
#
# 'save' don't change filename case (default)
# 'upper' uppercase filename (FILE-NAME.EXT)
# 'lower' lowercase filename (file-name.ext)
# 'mixed' make filename pretty (File-Name.Ext)
#
# * tested only with english filenames
#
#inboundcase save
#
# Should binkd send empty files?
# dont-send-empty [no(default)|arcmail|yes]
#
# 'no' inhibit only sending *.?ut (netmail) with size <=60 bytes
# 'arcmail' do not send zero-size arcmail and pkt <= 60 bytes
# 'yes' do not send all zero-size files and pkt <= 60 bytes
#
dont-send-empty yes
#
# Should binkd delete empty point dirs in BSO?
# Uncomment the following line, if yes
#
#deletedirs
#
# Use Amiga Style Outbound (ASO)
#
#aso
#
# Limit bandwidth (rate):
# limit-rate [all|listed|unlisted|secure|unsecure] <rate>[kM%]|- <mask>...
#
# <rate> is a max allowed rate in bytes-per-second (k=kbytes, M=Mbytes),
# if % is specified, the node -bw rate is multiplied by this value
# in percents, if - then rate is unlimited
# <mask> is a filename mask to apply this rule to
#
# limit-rate rules are checked in the order they appear in config, first
# matcing rule is applied
#
# IMPORTANT! If a node has no explicitly defined bandwidth limit, the
# defnode's limit is used. If defnode has no limit, rate is unlimited.
#
#limit-rate unsecure - *.pkt
#limit-rate unsecure 2k *
# Define shared aka
# Add a shared-address as aka for any node from this list, so that
# uncompessed netmail for shared aka will be sent in the first session with # any node listed in shares; packet header will be updated to match this
# node's main aka and pkt password
# share <shared-address> <node1> [<node2> ...]
# example:
#share 2:999/999 2:5020/52 2:5020/238
#
# Check the sender's address in incoming pkt's, change the file extension
# to <ext>, if the check failed
# check-pkthdr [all|secure|unsecure|listed|unlisted] <ext>
#
# 'all' applies to all nodes
# 'listed' applies, if at least one aka is defined by 'node' keyword
# 'secure' applies, if at least one aka is password-protected
#
# It's ok to specify .<ext> as well as <ext> - the dot before ext is ignored
# Flag order: -nohc (for any aka), -hc (for any aka), check-pkthdr flag
#
#check-pkthdr secure .sec
#
# Define a link:
# node [[z:]n/]n[.p][@domain] [-nr|-nd] [-md] [-hc|-nohc] [-ip|-sip] [-bw
<
send_rate>[/<recv_rate>]] [-4|-6] [{hosts|-} [{<inpwd>[,[<pktpwd>][,<outpwd>]]| -}
[flavour [{obox|-} [{ibox|-}]]]]]
#
# * All non-"-" fields will redefine the values specified for the same node
# earlier in config.
# * The meaning of <inpwd>, <pktpwd> and <outpwd> is the same as in
# the description of the "passwords" token. Any password is one word
# without spaces or tabs. If <pktpwd> or <outpwd> is omitted, it is
# assumed equal to <inpwd>.
# * Flavour is one of i, c, d, -, h; and is the flavour for the outbound
# filebox ("obox").
# * Binkd sends from obox all non-dir entries NOT matching ".*" wildcard.
# EVERY TIME YOU PUT A FILE INTO OBOX CHECK IF BINKD WILL BE ABLE TO
# UNLINK IT. Otherwise, the session will never end.
# * Default for ibox is inbound or inbound-nosecure depending on the pwd field. # * Default for port is oport.
# * `-nr' stands for `Not Reliable Link', this works only on outbound calls
# with another binkp/1.1 mailer. The option solves the only problem with
# binkd having no enough time to start receiving of a file from
# non-zero offset before IP link's down, so don't use it unless you
# have this problem -- really not effective
# * `-nd' means "No Dupe Mode", this works only on outbound calls with
# another binkd 0.9.3 or higher. The option solves problem with
# duplicating files while losts carrier but link is a bit slower
# then with "-nr" option
# * `-md' means "Must have CRAM-MD5". This works only with nodes with
# binkd or argus supported this method. Do not set it if your link
# can use the old version of binkd.
# * `-nomd' - do not use CRAM-MD5 for this node (send plain text password)
# * `-hc' enables check of sender address in pkt header for this node/aka
# (overrides the setting of the 'check-pkthdr' statement)
# * `-nohc' disables check of sender address in pkt header for this node/aka
# (overrides the setting of the 'check-pkthdr' statement)
# * `-ip' means "Remote IP check". In this case the node will be
# rejected, if it comes not from one of its IP-addresses.
# Remote AKAs with bad IP-address will be dropped on outgoing calls.
# * `-sip' means "Strict remote IP check". Like "-ip", but node will be
# rejected, if no IP-addresses allowed ("-" or not resolved).
# Remote AKAs with bad IP-address will be dropped on outgoing calls.
# * `-bw' specifies bandwidth (rate) limit for this node
# if one value is specified, it's used as both send and recv limit
# if two values are specified, first is for send and second - for recv
# rate values are expected to be in format `<rate>[kM%]|-'
# (see limit-rate keyword for detailed description)
# * `-noproxy' disables usage of proxy/socks server when calling this node
# (node expected to be inside local network)
# * `-4' only connect via IPv4
# * `-6' only connect via IPv6
# * Hosts is a list in form
# host1[:pod
SEEN-BY: 1/1 100 101 102 103 104 105 106 107 109 110 111 112 113 114 115 116 SEEN-BY: 1/117 118 119 120 121 122 123 124 125 126 127 128 129 130 131 133 134 SEEN-BY: 1/135 136 137 138 139 140 141 143 144 145 146 147 148 149 150 152 153 SEEN-BY: 1/154 155 156 157 158 159 160 161 162 163 164 165 166 167 168 169 171 SEEN-BY: 1/172 173 174 175 176 177 178 180 181 182 183 184 185 186 187 188 189 SEEN-BY: 1/190 191 192 193 194 195 197 198 199 200 201 202 203 204 205 206 207 SEEN-BY: 1/208 209 995 999 2/100 3/100 4/100 5/100