Paulie,

Not sure why, but when I log off your BBS, after I press g, the screen
clears, then I have a bouncing cursor box on the bottom of my screen. I manually disconnect, but when I try to log back on it says I'm already
ogged on.

--- Mystic BBS v1.12 A46 2020/08/26 (Raspberry Pi/32)
* Origin: theoasisbbs.ddns.net:1357 (21:4/127)

Paulie,

Not sure why, but when I log off your BBS, after I press g, the screen clears, then I have a bouncing cursor box on the bottom of my screen. I manually disconnect, but when I try to log back on it says I'm already ogged on.

LOL - I was just talking to another sysOp about this today. :P Furthermore, when I go and kick your 'ghost node', you sometimes log right back in! It happens EVERY time you logoff, and without my interaction your node will just set there!

So, to fix it immediately so you can access the BBS I'm gonna give you extended
access. This isn't a fix, but will allow you to 'logon' to more than one node... I'll iron out the issue, as this is a bandaid.

Do you call in with Netrunner or Syncterm? I ask because... I have a script running right when you described a bouncing cursor... and I wonder if its something to do with it - lemme look into it.



Hey fsxNet; any ideas? I have an automessage MPL running at that moment user describes, with some fancy ANSI... hmmm..



|07p|15AULIE|1142|07o
|08.........

--- Mystic BBS v1.12 A47 2021/01/26 (Raspberry Pi/32)
* Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)

On 08 Feb 2021, paulie420 said the following...

Paulie,

Not sure why, but when I log off your BBS, after I press g, the scree clears, then I have a bouncing cursor box on the bottom of my screen. manually disconnect, but when I try to log back on it says I'm alread ogged on.

LOL - I was just talking to another sysOp about this today. :P Furthermore, when I go and kick your 'ghost node', you sometimes log
right back in! It happens EVERY time you logoff, and without my interaction your node will just set there!

So apparently it could be hanging there for somw time. Primarily, I've been logging on, grabbing a couple of mods to look at then log off, open the zips and read the txt files to see If I want to try them out, then maybe log on again to grab another.

Typical leech stuff you know. :-P

So, to fix it immediately so you can access the BBS I'm gonna give you extended
access. This isn't a fix, but will allow you to 'logon' to more than one node... I'll iron out the issue, as this is a bandaid.

Do you call in with Netrunner or Syncterm? I ask because... I have a script running right when you described a bouncing cursor... and I
wonder if its something to do with it - lemme look into it.

I'm using Syncterm. This setup is command line only, so I'm not even sure if
I can run netrunner.

I have Termius as a "proper" Android app as well that I could try just to see if it does it there as well. It says it does ANSI, but I think it more simulates ANSI.

--- Mystic BBS v1.12 A46 2020/08/26 (Raspberry Pi/32)
* Origin: theoasisbbs.ddns.net:1357

So apparently it could be hanging there for somw time. Primarily, I've been logging on, grabbing a couple of mods to look at then log off,
open the zips and read the txt files to see If I want to try them out, then maybe log on again to grab another.

Typical leech stuff you know. :-P

There is no 'leeching' in 2o21, man... there is no file limits or data caps here - HAVE AT IT. PS, all the current mods are listed under their own file areas... super current ones are RCS Mods by Black Panther & XQTR Mods. Get some!!

I'm using Syncterm. This setup is command line only, so I'm not even
sure if I can run netrunner.

I have Termius as a "proper" Android app as well that I could try just
to see if it does it there as well. It says it does ANSI, but I think
it more simulates ANSI.

Don't trip... like I said I gave you access so you won't get locked out again, and I'm taking a look at getting it fixed for you. Cheers, brother - yer allowed to push the D/L buttons!!

GO. :P



|07p|15AULIE|1142|07o
|08.........

--- Mystic BBS v1.12 A47 2021/01/26 (Raspberry Pi/32)
* Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)

On 08 Feb 2021 at 02:04a, paulie420 pondered and said...

--- Mystic BBS v1.12 A47 2021/01/26 (Raspberry Pi/32)
* Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)
Hey fsxNet; any ideas? I have an automessage MPL running at that moment user describes, with some fancy ANSI... hmmm..

Could it be related to the alpha build?

Is it a SSL or Telnet connect?

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)

On 09 Feb 2021, 01:38p, Avon said the following...

Hey fsxNet; any ideas? I have an automessage MPL running at that mome user describes, with some fancy ANSI... hmmm..

Could it be related to the alpha build?

I'm thinking it might have something to do with terminal size. There are checks in place within the MPL for both 80 and 132 column, but I think that Barmed is connecting via his phone, so the terminal size is smaller...


---

Black Panther(RCS)
aka Dan Richter
Castle Rock BBS
telnet://bbs.castlerockbbs.com
http://www.castlerockbbs.com
http://github.com/DRPanther
The sparrows are flying again...

--- Mystic BBS v1.12 A47 2021/01/14 (Linux/64)
* Origin: Castle Rock BBS - bbs.castlerockbbs.com (21:1/186)

On 09 Feb 2021, Avon said the following...

--- Mystic BBS v1.12 A47 2021/01/26 (Raspberry Pi/32)
* Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)
Hey fsxNet; any ideas? I have an automessage MPL running at that mome user describes, with some fancy ANSI... hmmm..

Could it be related to the alpha build?

Is it a SSL or Telnet connect?

It's Telnet connect.

--- Mystic BBS v1.12 A46 2020/08/26 (Raspberry Pi/32)
* Origin: theoasisbbs.ddns.net:1357 (21:4/127)

On 08 Feb 2021, Black Panther said the following...

Hey fsxNet; any ideas? I have an automessage MPL running at that user describes, with some fancy ANSI... hmmm..

Could it be related to the alpha build?

I'm thinking it might have something to do with terminal size. There are checks
in place within the MPL for both 80 and 132 column, but I think that Barmed is connecting via his phone, so the terminal size is smaller...

I'm running Syncterm in a Termux session under Ubuntu. More or less as if
it's a portable Raspberry Pi.

So far Paulies is the only system that I've run into this with.

Syncterm says itps 80x24 or x25, but it splits into 3 columns when I connect,
2 wide blue on either side and the terminal in the center. I'm fooling with
the settings in Syncterm that I can to see iff that does anything.

I've also installed Multimail on this thing to play with offline mail in this fashion.

If I knew of a point program that runs in a Linux terminal, I'd play with
that as well.

--- Mystic BBS v1.12 A46 2020/08/26 (Raspberry Pi/32)
* Origin: theoasisbbs.ddns.net:1357 (21:4/127)

Re: Re: 20 for Beers
By: Barmed to Black Panther on Mon Feb 08 2021 07:34 pm

If I knew of a point program that runs in a Linux terminal, I'd play with that as well.

OpenXP has a 64bit linux version and a 32bit windows version along with source.

Ttyl :-),
Al

... Enter any 12 digit prime number to continue
--- SBBSecho 3.12-Linux
* Origin: The Rusty MailBox - Penticton, BC Canada (21:4/106.1)

On 08 Feb 2021, paulie420 said the following...

open the zips and read the txt files to see If I want to try them out then maybe log on again to grab another.

Typical leech stuff you know. :-P

There is no 'leeching' in 2o21, man... there is no file limits or data caps here - HAVE AT IT. PS, all the current mods are listed under their own file areas... super current ones are RCS Mods by Black Panther &
XQTR Mods. Get some!!

I was joking about the leeching. I think I'm good for now though. I've got 5 or 6 I'm looking at. MRC and the interBBS one liners might take me a bit to figure out.

I'm not personally a fan of group chat programs anymore, but I did like them
on BBSes back in the day, and I hear people talking about MRC often enough.

I'm also looking at an autovalidate mod I think Netsurge wrote.

Plus looking into the best way to figure out how to accomplish a couple of ideas of my own.

AND figuring out why even with cryptlib ibstalled, SSH and email password function still don't work.


I'll be busy for a bit.

--- Mystic BBS v1.12 A46 2020/08/26 (Raspberry Pi/32)
* Origin: theoasisbbs.ddns.net:1357

Could it be related to the alpha build?

Is it a SSL or Telnet connect?

Maybe; or could be a termsize function we're using with a user who connects with a not-standard x/y....

Its a47, most current build - and the user is on a telnet connection - I haven't read the msg yet, but BP replied concerning this... I'll update if I learn exactly why. I just reached out to my peeps in the meantime.

:P Thank you for brainstorming with me, and certainly send any suggestions; this might be our fault. :P (I modified the script pretty good and aren't the bestest. :P)



|07p|15AULIE|1142|07o
|08.........

--- Mystic BBS v1.12 A47 2021/01/26 (Raspberry Pi/32)
* Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)

I'm thinking it might have something to do with terminal size. There are checks in place within the MPL for both 80 and 132 column, but I think that Barmed is connecting via his phone, so the terminal size is smaller...

I didn't realize, at first, that it was happening because a script run; I know what to do temp... I'll turn that off for said user, and... read your replies that I haven't caught up on yet; I didn't know that it was from my modded script. :P



|07p|15AULIE|1142|07o
|08.........

--- Mystic BBS v1.12 A47 2021/01/26 (Raspberry Pi/32)
* Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)

I'm not personally a fan of group chat programs anymore, but I did like them on BBSes back in the day, and I hear people talking about MRC often enough.

MPL is easy enough, and I'm good with Linux if you have any questions about that... paulie420@gmail.com

I'm also looking at an autovalidate mod I think Netsurge wrote.

AND figuring out why even with cryptlib ibstalled, SSH and email password function still don't work.

I've had issues with getting SMTP going, so I still don't have email functions setup. :P

I'll be busy for a bit.

You'll be busy forever. LOL.



|07p|15AULIE|1142|07o
|08.........

--- Mystic BBS v1.12 A47 2021/01/26 (Raspberry Pi/32)
* Origin: 2o fOr beeRS bbs>>>20ForBeers.com:1337 (21:2/150)

On 08 Feb 2021 at 09:59p, paulie420 pondered and said...

Is it a SSL or Telnet connect?

Maybe; or could be a termsize function we're using with a user who connects with a not-standard x/y....

Its a47, most current build - and the user is on a telnet connection - I haven't read the msg yet, but BP replied concerning this... I'll update
if I learn exactly why. I just reached out to my peeps in the meantime.

:P Thank you for brainstorming with me, and certainly send any

:)

--- Mystic BBS v1.12 A46 2020/08/26 (Windows/32)
* Origin: Agency BBS | Dunedin, New Zealand | agency.bbs.nz (21:1/101)