Hey Spectre,

just wondering if your apple's use the SCSI interface and if you would
happen to have any terminating resistors spare?

https://www.mouser.co.uk/ProductDetail/652-4608X-104-331L

Paying $24 for postage on a $2-4 part is rather crazy....




\/orlon
VK3HEG


--- MagickaBBS v0.15alpha (Linux/armv6l)
* Origin: \/orlon Empire: Sector 550 (21:1/195.1)

just wondering if your apple's use the SCSI interface and if you
would happen to have any terminating resistors spare?

Wellllll, yes and maybe. I think I've only got the one SCSI Bus terminator handy, she's a powered pass through 50pin centronics job. Still got two SCSI drives.. I actually don't have a SCSI card though, I'd give my first borns left testicle to find one though. I believe I still have the resistor packs that fit into the HD's themselves though. Question is, does your device require the 3 piece or the 2 piece set? If none of this works for you I may
be able to lay hand to another one.

Spec


--- SuperBBS v1.17-3 (Eval)
* Origin: (21:3/101)

Hello Spectre!

15 Jul 20 18:27, you wrote to me:

just wondering if your apple's use the SCSI interface and if you
would happen to have any terminating resistors spare?

Wellllll, yes and maybe. I think I've only got the one SCSI Bus terminator handy, she's a powered pass through 50pin centronics job.

Won't work #-(

Still got two SCSI drives.. I actually don't have a SCSI card though,
I'd give my first borns left testicle to find one though. I believe

PC or Apple scsi card? If pc then I have two spare Adaptec 2940's and your welcome to one for postage cost.

I still have the resistor packs that fit into the HD's themselves
though. Question is, does your device require the 3 piece or the 2
piece set? If none of this works for you I may be able to lay hand to another one.

I need three sets of 8 pin packs. To go into the Amiga 3000 MB I'm trying to debug.



Vorlon


--- GoldED+/LNX 1.1.5-b20180707
* Origin: Dragon's Lair ---:- dragon.vk3heg.net -:--- (21:1/195)

PC or Apple scsi card? If pc then I have two spare Adaptec 2940's

I don't have an Apple SCSI card :/ I do have a PCI one sitting in my desk draw though. Trouble I have at the moment, is having gone through all the PCI nics looking for something, I'm coming to the opinion that the PCI slots on these systems are pretty much just for looks :(

I need three sets of 8 pin packs. To go into the Amiga 3000 MB I'm
trying to debug.

Ok.. lemme see... I'll pop a photo up of what I have, but I think I'm seeing unless I got this wrong... :) 1 set of 3 x8pin packs. Of which I have 2

Spec

http://tlp.zapto.org/hidden_stuff/resistor_pack.jpg


--- SuperBBS v1.17-3 (Eval)
* Origin: (21:3/101)

Hi Spec,

I don't have an Apple SCSI card :/ I do have a PCI one sitting in
my desk draw though. Trouble I have at the moment, is having gone
through all the PCI nics looking for something, I'm coming to the
opinion that the PCI slots on these systems are pretty much just

for looks :(

I've never ran into PCI slot's having issues, but card to go into them
yes.. Very anoyaing.

I need three sets of 8 pin packs. To go into the Amiga 3000 MB
I'm trying to debug.

Ok.. lemme see... I'll pop a photo up of what I have, but I think
I'm seeing unless I got this wrong... :) 1 set of 3 x8pin packs.
Of which I have 2

Spec

http://tlp.zapto.org/hidden_stuff/resistor_pack.jpg

The ones on the left of that photo are what I'm looking for.





\/orlon
VK3HEG


--- MagickaBBS v0.15alpha (Linux/armv6l)
* Origin: \/orlon Empire: Sector 550 (21:1/195.1)

I've never ran into PCI slot's having issues, but card to go into them

I don't think I've ever had a failed PCI card... although I had some rather delicate Wifi cards at one time... but I used to think PCI was great, then we had the voltage change, which caught me out as I was still using BX mobo's at the time...

Spec


*** THE READER V4.50 [freeware]
--- SuperBBS v1.17-3 (Eval)
* Origin: Scrawled in haste at The Lower Planes (21:3/101)