SeaTel works great. I was wondering if you can incorporate rlogin also
so that I can connect to some game servers.
--- Wildcat! v7.0.454.6 (Nov 13 2018), Editor Mod v2.1
RLOGIN is not available in WINServer yet. I have it on the feature request list
I am preparing for Hector to send to him on Friday, if not before.
I am preparing for Hector to send to him on Friday, if not before.
Thanks for the feed back.
--- Platinum Xpress/Win/WINServer v3.1
Are you on the AUP? If so, you should have gotten an update to 7.0 for this like I did.
Are you on the AUP? If so, you should have gotten an update to 7.0 for t like I did.
Yes, I am. Did not too long ago update.
The there should be a PXWINS-SETUP.EXE or something like that in your
PXW directory that you need to run to update to the latest release. As always, back up before upgrading :)
The there should be a PXWINS-SETUP.EXE or something like that in your
PXW directory that you need to run to update to the latest release. As always, back up before upgrading :)
So the pxwims-setup.exe should be run again? The first time I got it I
ran it, so I guess I got an updated one and need to run that one also.
What is the date on the setup file you have from your last AUP run?
Here is the latest I have:
02/02/2019 02:23 PM 3,654,834 pxwin-setup.exe
But, yes, each time that file comes down on the AUP, it has to be run
again. The AUP does not run it for you.
Ruben Figueroa wrote to Robert Wolfe <=-
I have that one and no I have not run it. I will run it this morning
--- Platinum Xpress/Win/WINServer v7.0
* Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)
The there should be a PXWINS-SETUP.EXE or something like that in your
PXW directory that you need to run to update to the latest release. As
always, back up before upgrading :)
So the pxwims-setup.exe should be run again? The first time I got it I ran it, so I guess I got an updated one and need to run that one also.
--- Platinum Xpress/Win/WINServer v3.1
* Origin: Prison Board BBS Mesquite Tx www.rdfig.net (1:124/5013)
Old message, I know, but this got tossed into my test system at bbs2.winserver.org and thought I would write a quick followup to thismessage
and see if things were working as they should be.
Old message, I know, but this got tossed into my test system at bbs2.winserver.org and thought I would write a quick followup to thismessage
and see if things were working as they should be.
Yep, still working. Also still hoping RLogin from wildcat can be done
in the near future.
On 04/08/19, Ruben Figueroa said the following...
thisOld message, I know, but this got tossed into my test system at
bbs2.winserver.org and thought I would write a quick followup to
message
and see if things were working as they should be.
Yep, still working. Also still hoping RLogin from wildcat can bedone
in the near future.
I asked Hector years ago to do something about the RLogin so that it
would be
compatible with Synchronet and Mystic and he said NO... Somebody will
have to
write a WCBasic file that would/should do the trick.
IB JOE
AKA Joe Schweier
SysOp of Joe's Computer & BBS
Telnet: joesbbs.com
Yep, still working. Also still hoping RLogin from wildcat can be done
in the near future.
On 04/08/19, Ruben Figueroa said the following...
thisOld message, I know, but this got tossed into my test system at
bbs2.winserver.org and thought I would write a quick followup to
message
and see if things were working as they should be.
Yep, still working. Also still hoping RLogin from wildcat can bedone
in the near future.
I asked Hector years ago to do something about the RLogin so that it
would be
compatible with Synchronet and Mystic and he said NO... Somebody will
have to
write a WCBasic file that would/should do the trick.
IB JOE
AKA Joe Schweier
SysOp of Joe's Computer & BBS
Telnet: joesbbs.com
itI asked Hector years ago to do something about the RLogin so that
Somebody willwould be
compatible with Synchronet and Mystic and he said NO...
to dohave to
write a WCBasic file that would/should do the trick.
I wonder if anyone out there who have the skills that would be willing
so. Thanks or the info.
I wonder if anyone out there who have the skills that would be willingto do
so. Thanks or the info.
Outbound rlogin or inbound?
Old message, I know, but this got tossed into my test system atmessage
bbs2.winserver.org and thought I would write a quick followup to this
and see if things were working as they should be.
Yep, still working. Also still hoping RLogin from wildcat can be done
in the near future.
I asked Hector years ago to do something about the RLogin so that it would be compatible with Synchronet and Mystic and he said NO... Somebody will have to write a WCBasic file that would/should do the trick.
I wonder if anyone out there who have the skills that would be willingto do
so. Thanks or the info.
Outbound rlogin or inbound?
Outbound.
I asked Hector years ago to do something about the RLogin so that it wou compatible with Synchronet and Mystic and he said NO... Somebody will ha write a WCBasic file that would/should do the trick.
Inbound rlogin would have to be a function of wcOnline.exe I would
think, and not a function of a WCX.
When I was speaking I was thinking about outbound, even when I was
talking with Hector at the time. He just stated that it was
unsecure... maybe he was thinking about just outbound side of things.
Still would be nice to have an outbound rLogin mod for WINServer that would expedite an automatic login like SBBS & Mystic do...
I might be able to write something that will let you do an interactive RLOGIN session to start off with, then go from there.
... Platinum Xpress & Wildcat!..... Nice!!!!
--- Platinum Xpress/Win/WINServer v7.0
* Origin: The Lean Angle BBS * Southaven MS * bbs2.winserver.or
I might be able to write something that will let you do an interactive
RLOGIN session to start off with, then go from there.
It'll just have to pass either the user name or the user handle and Synchronet or mystic bbs will log you on automatically
On Apr 17, 2019 08:31pm, Ib Joe wrote to Robert Wolfe:
I might be able to write something that will let you do an interacti
RLOGIN session to start off with, then go from there.
It'll just have to pass either the user name or the user handle and Synchronet or mystic bbs will log you on automatically
Yeah, but it's difficult when you get nothing but a blank screen on connect.
It'll just have to pass either the user name or the user handle and Synchronet or mystic bbs will log you on automatically
On 4/17/2019 8:31 PM, Ib Joe wrote to Robert Wolfe:
It'll just have to pass either the user name or the user handle and Synchronet or mystic bbs will log you on automatically
Yeah, but still having issues with getting something more than just a blank screen on connect.
When I was speaking I was thinking about outbound, even when I was talking with Hector at the time. He just stated that it was unsecure... maybe he wa thinking about just outbound side of things.
Still would be nice to have an outbound rLogin mod for WINServer that would expedite an automatic login like SBBS & Mystic do...
When I was speaking I was thinking about outbound, even when I was talking with Hector at the time. He just stated that it was unsecure... maybe he wa thinking about just outbound side of things.
No, the rlogin protocol in general, inbound and outbound, is as insecure
as telnet is.
Robert do you use WINS to poll any qwk mail??
Robert do you use WINS to poll any qwk mail??
Exclusively. If it's from a Synchronet system, that is what I use wcQWKnet for.
On 05/02/19, Robert Wolfe said the following...
Robert do you use WINS to poll any qwk mail??
Exclusively. If it's from a Synchronet system, that is what I use
wcQWKnet for.
Is that a utility you made?? I use to use wcqwk and it worked okay... never had a problem with it. I have forgot how I made it run. I need
to figure out how to get a cfg file to poll vert.
On 05/02/19, Robert Wolfe said the following...
Robert do you use WINS to poll any qwk mail??
Its real easy to get to poll synchonet for dove mail. I used when I had
my system up.
On May 04, 2019 12:23pm, Datalus wrote to Robert Wolfe:
We are talking specifically with WINServer. Yes, it is fairly easy --
if you want to write batch files and script the Windows FTP.EXE client. wcQWKnet does all that using WINServer's only FTP client code. wcQWKnet
| Sysop: | sneaky |
|---|---|
| Location: | Ashburton,NZ |
| Users: | 31 |
| Nodes: | 8 (0 / 8) |
| Uptime: | 159:37:08 |
| Calls: | 2,076 |
| Calls today: | 2 |
| Files: | 11,137 |
| Messages: | 947,043 |