Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the
px.ini file by removing the drive designation, just leaving folder info.
It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it
couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

ID: PX/Win v3.0pr5 PX20-1127M2
SGID: 1:124/5013 ced6847a
ZUTC: -0500

Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in ->-> WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the ->px.ini file by removing the drive designation, just leaving folder info.

That's what I'm getting now, I had it working before I changed my
setup to use a XP VM under W10 so I'm thinking it has something to do with it.

It reads the nodelist and very slowly but it doesn't find the node# entered, if I use PXtools I can search the nodelist just fine so thinking the nodelist isn't the problem.

It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it ->couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

...As I said before, I never repeat myself.
---BapStats Module (bsDBASE v6.1 Build 1)

* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)

ID: PX/Win v3.0pr5 PX20-1127M2
SGID: 1:124/5013 ced6847a
ZUTC: -0500

Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in ->-> WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the ->px.ini file by removing the drive designation, just leaving folder info.

That's what I'm getting now, I had it working before I changed my
setup to use a XP VM under W10 so I'm thinking it has something to do with it.

It reads the nodelist and very slowly but it doesn't find the node# entered, if I use PXtools I can search the nodelist just fine so thinking the nodelist isn't the problem.

It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it ->couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

...As I said before, I never repeat myself.
---BapStats Module (bsDBASE v6.1 Build 1)

* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)

ID: PX/Win v3.0pr5 PX20-1127M2
SGID: 1:124/5013 ced6847a
ZUTC: -0500

Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in ->-> WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the ->px.ini file by removing the drive designation, just leaving folder info.

That's what I'm getting now, I had it working before I changed my
setup to use a XP VM under W10 so I'm thinking it has something to do with it.

It reads the nodelist and very slowly but it doesn't find the node# entered, if I use PXtools I can search the nodelist just fine so thinking the nodelist isn't the problem.

It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it ->couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

...As I said before, I never repeat myself.
---BapStats Module (bsDBASE v6.1 Build 1)

* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)

ID: PX/Win v3.0pr5 PX20-1127M2
SGID: 1:124/5013 ced6847a
ZUTC: -0500

Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in ->-> WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the ->px.ini file by removing the drive designation, just leaving folder info.

That's what I'm getting now, I had it working before I changed my
setup to use a XP VM under W10 so I'm thinking it has something to do with it.

It reads the nodelist and very slowly but it doesn't find the node# entered, if I use PXtools I can search the nodelist just fine so thinking the nodelist isn't the problem.

It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it ->couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

...As I said before, I never repeat myself.
---BapStats Module (bsDBASE v6.1 Build 1)

* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)

ID: PX/Win v3.0pr5 PX20-1127M2
SGID: 1:124/5013 ced6847a
ZUTC: -0500

Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in ->-> WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the ->px.ini file by removing the drive designation, just leaving folder info.

That's what I'm getting now, I had it working before I changed my
setup to use a XP VM under W10 so I'm thinking it has something to do with it.

It reads the nodelist and very slowly but it doesn't find the node# entered, if I use PXtools I can search the nodelist just fine so thinking the nodelist isn't the problem.

It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it ->couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

...As I said before, I never repeat myself.
---BapStats Module (bsDBASE v6.1 Build 1)

* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)

ID: PX/Win v3.0pr5 PX20-1127M2
SGID: 1:124/5013 ced6847a
ZUTC: -0500

Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in ->-> WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the ->px.ini file by removing the drive designation, just leaving folder info.

That's what I'm getting now, I had it working before I changed my
setup to use a XP VM under W10 so I'm thinking it has something to do with it.

It reads the nodelist and very slowly but it doesn't find the node# entered, if I use PXtools I can search the nodelist just fine so thinking the nodelist isn't the problem.

It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it ->couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

...As I said before, I never repeat myself.
---BapStats Module (bsDBASE v6.1 Build 1)

* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)

ID: PX/Win v3.0pr5 PX20-1127M2
SGID: 1:124/5013 ced6847a
ZUTC: -0500

Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in ->-> WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the ->px.ini file by removing the drive designation, just leaving folder info.

That's what I'm getting now, I had it working before I changed my
setup to use a XP VM under W10 so I'm thinking it has something to do with it.

It reads the nodelist and very slowly but it doesn't find the node# entered, if I use PXtools I can search the nodelist just fine so thinking the nodelist isn't the problem.

It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it ->couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

...As I said before, I never repeat myself.
---BapStats Module (bsDBASE v6.1 Build 1)

* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)

ID: PX/Win v3.0pr5 PX20-1127M2
SGID: 1:124/5013 ced6847a
ZUTC: -0500

Do you have these 3 files (fidomsg.wcx, pxsrv.dll, pxnl.dll) in your
WC5 root folder on BOTH PC's (W10 & XP-VM)? also do you have px.ini in ->-> WC5/PXDATA directory on both systems?

I was premature, it did not give an error after I made sure 3 files were
in wc5 root folder (shared folder for both computers) and I edited the ->px.ini file by removing the drive designation, just leaving folder info.

That's what I'm getting now, I had it working before I changed my
setup to use a XP VM under W10 so I'm thinking it has something to do with it.

It reads the nodelist and very slowly but it doesn't find the node# entered, if I use PXtools I can search the nodelist just fine so thinking the nodelist isn't the problem.

It gives me prompt to enter the fido address, which I do and then it
takes forever and comes back to the prompt for fido address, like it ->couldn't find the nodelist I guess.

--- Platinum Xpress/Win/WINServer v3.0pr5
* Origin: Prison Board BBS Mesquite Tx //telnet.RDFIG.NET www. (1:124/5013)

...As I said before, I never repeat myself.
---BapStats Module (bsDBASE v6.1 Build 1)

* Origin: TECHWARE BBS - Since 1995 - www.techware.dynip.com/ (1:102/401)